TOCE PERFORMANCE / KAWASAKI NINJA ZX-10R / 2011–2015
SUPERBIKE POWER.
RAZOR TIP ATTITUDE.
Transform your 2011–2015 Kawasaki Ninja ZX-10R with the Toce Performance Razor Tip Slip-On Exhaust System. Developed for Kawasaki's 998cc inline-four superbike, this exhaust combines our proprietary angular Razor Tip muffler with a purpose-built connecting midpipe and mounting bracket. Experience aggressive high-RPM sound, a deep cruising tone, lightweight baffled construction, and handcrafted American quality.
Built for the 2011–2015 Ninja ZX-10R
The 2011–2015 Kawasaki Ninja ZX-10R represents the fourth generation of Kawasaki's flagship liter-class supersport motorcycle.
Featuring a 998cc liquid-cooled inline-four engine, advanced electronic rider aids, and race-inspired chassis engineering, this generation brought major improvements to Kawasaki's superbike platform.
Its high-revving engine is known for an aggressive exhaust character that becomes increasingly pronounced as RPM rises.
Toce Performance developed the Razor Tip Slip-On specifically for this generation, providing a compact exhaust upgrade that complements the ZX-10R's aerodynamic bodywork and performance-focused styling.
The system retains the original primary headers while replacing the OEM muffler assembly with Toce's application-specific Razor Tip configuration.
The Signature Razor Tip Muffler
The Razor Tip is one of Toce Performance's defining proprietary exhaust designs. Its sharply angled outlet geometry gives the muffler an unmistakable appearance that stands apart from conventional round, oval, and tapered exhausts.
On the ZX-10R, the compact Razor Tip complements the motorcycle's aggressive superbike styling while reducing the visual bulk of the factory muffler.
The internally baffled Razor Tip canister weighs just under three pounds and incorporates a 304 stainless steel spiral-welded perforated baffle assembly with ISW acoustic packing.
Toce develops each exhaust around the intended motorcycle application, using dedicated fixtures and model-specific mounting components rather than generic universal muffler bands.
Proprietary angular outlet design with unmistakable Toce styling.
Compact, lightweight baffled canister construction.
Deep cruising tone and aggressive high-RPM superbike character.
In-house CNC-machined components and hand-welded American construction.
Slip-On Exhaust — Factory Headers Retained
This Razor Tip Slip-On is a bolt-on muffler replacement for the 2011–2015 Kawasaki Ninja ZX-10R.
It replaces the OEM muffler assembly and connects to the original header outlet using the Toce midpipe connection and supplied T-bolt clamp.
The factory primary headers remain installed. No complete header replacement is required.
Toce supplies an application-specific mounting bracket and hardware to secure the Razor Tip muffler at the passenger footpeg mounting location.
Unlike a complete exhaust system, this configuration does not replace the motorcycle's entire header assembly.
Retains the factory headers. Uses the original header outlet, Toce connecting midpipe, T-bolt clamp, dedicated mounting bracket, and supplied M8 hardware.
Deep Cruising Tone. Aggressive Superbike Sound.
The 998cc ZX-10R inline-four is known for its sharp throttle response and intense high-RPM exhaust character.
The Razor Tip emphasizes that personality with a smooth, meaty, throaty exhaust note while cruising and a significantly more aggressive tone under acceleration.
As engine speed rises, the compact muffler highlights the ZX-10R's unmistakable liter-bike sound.
The internal stainless steel baffling and ISW acoustic packing help shape the signature Toce exhaust note.
A secondary Razor Tip Decibel Killer is available separately for riders seeking additional sound attenuation.
Lightweight Muffler Construction
The baffled Razor Tip canister itself weighs just under three pounds, offering a compact alternative to the larger original muffler assembly.
Its reduced size creates a cleaner exhaust profile around the right side of the motorcycle.
The smaller canister also complements the ZX-10R's angular bodywork and race-inspired appearance.
Actual installed weight savings depend on the complete OEM components removed and the full Toce exhaust assembly fitted to the motorcycle.
Factory Exhaust Servo Cable Removal
The 2011–2015 ZX-10R incorporates an exhaust-valve servo system connected to the original muffler assembly.
Toce's installation instructions specify removing the exhaust-valve cables from the servo under the seat while holding the servo stationary with a wrench.
The OEM muffler assembly is then removed together with its attached servo cables.
The original servo motor may remain installed when the cables are disconnected according to the Toce installation procedure.
For supported configurations, Toce also offers a ViziTec Exhaust Servo Buddy / Eliminator that can allow removal of the servo assembly without triggering the associated FI warning.
Toce's installation manual directs removal of the exhaust-valve cables from the servo under the seat. A servo eliminator is an optional accessory and is not automatically required when the original servo motor remains connected.
MWR Intake and ECU Performance Options
The Razor Tip Slip-On can be paired with complementary performance components for the 2011–2015 Kawasaki Ninja ZX-10R.
Toce offers an MWR High-Efficiency Air Filter specifically listed for this model generation. Its washable, re-oilable design is engineered to improve intake airflow distribution and reduce turbulence within the airbox.
Toce also references ECU remapping as a complementary performance modification for the ZX-10R platform.
Depending on the exact ECU and available tuning support, calibration may address fueling, ignition timing, secondary throttle behavior, cooling fan settings, and other supported engine-management parameters.
Combining compatible exhaust, intake, and ECU modifications allows the motorcycle's overall performance configuration to be addressed as a coordinated package.
No specific horsepower or torque gain is claimed for the Razor Tip Slip-On alone.
Washable, re-oilable intake filtration for the 2011–2015 ZX-10R.
Optional tuning consideration for supported ZX-10R ECU configurations.
Optional accessory for supported exhaust-servo removal.
Optional secondary insert for additional sound attenuation.
Premium Materials. Handcrafted in the USA.
The Razor Tip incorporates chemically certified 6061-T6 and 6063 aircraft-grade aluminum components, a 304 stainless steel spiral-welded perforated baffle assembly, and ISW acoustic packing.
Toce Performance designs and CNC-machines its components in-house and hand-welds exhaust assemblies at its manufacturing facility in Manchester, Connecticut.
Dedicated production fixtures help maintain consistent component alignment, mounting geometry, and application-specific construction.
The ZX-10R system uses a purpose-built bracket and connecting midpipe rather than a generic universal muffler mounting band.
Installation — 2011–2015 ZX-10R
Toce provides dedicated installation instructions for this Razor Tip Slip-On.
Begin by removing the rear passenger seat and tail cover, followed by the main seat.
Locate the exhaust-valve servo under the seat. Disconnect the original exhaust-valve cables while holding the servo stationary with a wrench.
Remove the OEM muffler assembly together with the servo cables.
Remove the lower right passenger footpeg mounting bolt and replace it with the supplied M8 x 35 mm bolt.
Attach the supplied mounting bracket to the Razor Tip exhaust assembly using the supplied M8 mounting hardware.
Position the supplied T-bolt clamp over the connecting midpipe where it joins the OEM header outlet.
Slide the slip-on assembly onto the original header connection and secure it to the mounting bracket.
Verify exhaust alignment and clearance, tighten the T-bolt clamp, and reinstall the seats and covers.
Toce recommends installation by a qualified motorcycle mechanic.
Kawasaki Ninja ZX-10R Fitment
This Razor Tip Slip-On is specifically designed for the 2011–2015 Kawasaki Ninja ZX-10R.
2011 ZX-10R: 998cc inline-four.
2012 ZX-10R: 998cc inline-four.
2013 ZX-10R: 998cc inline-four.
2014 ZX-10R: 998cc inline-four.
2015 ZX-10R: 998cc inline-four.
The 2008–2010 ZX-10R uses a separate Razor Tip Slip-On with different mounting hardware.
The 2021–2026 ZX-10R also uses a separate application-specific Razor Tip Slip-On.
Razor Tip Slip-On with retained factory headers, dedicated passenger-footpeg mounting bracket, supplied M8 hardware, and T-bolt clamp. SKU 30129-KAWI-ZX11.