TOCE PERFORMANCE / KAWASAKI Z125 PRO / 2017–2027
NOT YOUR AVERAGE Z125.
NOT YOUR AVERAGE EXHAUST.
Take your Kawasaki Z125 Pro beyond the ordinary with the Toce Performance T-Slash Undertail Full Exhaust System. Developed to replace the conventional side-mounted exhaust arrangement with our signature GP-inspired undertail muffler, this complete system combines a stepped stainless steel header, aggressive single-cylinder sound, and handcrafted American construction. Designed for enthusiasts seeking a distinctive custom appearance, the T-Slash delivers a Z125 unlike anything else on the street or at the show.
Designed for the Kawasaki Z125 Pro
The Kawasaki Z125 Pro is a compact 125cc-class motorcycle known for its playful handling, accessible dimensions, and customization potential.
Its compact chassis makes it an ideal platform for enthusiasts looking to build something visually distinctive.
Rather than producing another conventional side-mounted muffler, Toce Performance developed an undertail exhaust assembly that places its signature T-Slash beneath the motorcycle's rear bodywork.
This application covers Kawasaki Z125 Pro model years 2017 through 2027.
Signature T-Slash Undertail Design
Toce's proprietary T-Slash muffler features distinctive slashed exhaust outlets inspired by the aggressive styling of racing motorcycles.
For the Z125 Pro, the system relocates the exhaust outlet beneath the tail section, creating a unique rear appearance.
The compact undertail arrangement distinguishes the motorcycle from the many conventional side-mounted aftermarket exhaust systems available for the Z125.
Its bold appearance complements custom bodywork, fender eliminators, and other personalized modifications.
Proprietary GP-inspired undertail muffler with distinctive slashed outlets.
Replaces the factory header and muffler with a dedicated stainless steel system.
Developed to support exhaust flow while maintaining responsive single-cylinder performance.
Handcrafted by Toce Performance in Manchester, Connecticut.
Complete Full Exhaust — Not a Slip-On
This product is a complete replacement exhaust system for the Kawasaki Z125 Pro.
The system replaces the original factory header and muffler assembly with a model-specific stainless steel header and signature T-Slash undertail canister.
The exhaust routing is designed to position the muffler beneath the motorcycle's tail section rather than in the original side-mounted location.
Unlike a conventional slip-on, this system requires removal of the factory header and additional installation work to accommodate the undertail configuration.
Includes the Toce stainless steel header assembly and T-Slash undertail muffler. The factory header and muffler are replaced.
Stepped Stainless Steel Header
The Toce Z125 exhaust features a precision CNC mandrel-bent stainless steel header assembly.
The stepped header design was developed to help the small-displacement engine breathe while preserving useful low-end response and supporting upper-RPM performance.
Toce designed the system as an alternative to traditional side-mounted exhaust configurations.
The stainless steel assembly combines model-specific routing with the company's signature undertail muffler.
Aggressive Single-Cylinder Exhaust Sound
The Z125 Pro's 125cc-class single-cylinder engine produces a distinctive exhaust pulse that becomes more pronounced with the Toce T-Slash Full Exhaust.
The system delivers a more aggressive exhaust character than the original factory muffler.
Its signature outlet arrangement, stainless steel internal baffling, and acoustic packing contribute to the recognizable Toce sound.
Actual sound level and tone vary with engine speed, riding conditions, and the motorcycle's configuration.
Premium Aluminum and Stainless Steel Construction
The T-Slash muffler incorporates chemically certified 6061-T6 and 6063 aircraft-grade aluminum components.
Internal construction includes 304 stainless steel spiral-welded perforated baffle assemblies with ISW acoustic packing.
The header is precision CNC mandrel-bent from stainless steel.
Each system is handcrafted by Toce Performance in Manchester, Connecticut, USA.
Custom Installation — Important Before Ordering
The Z125 Pro T-Slash Undertail Full Exhaust is a custom installation and should not be mistaken for a straightforward bolt-on exhaust.
Installing the system requires drilling through the approximately 1/8-inch metal dust plate on the swingarm using a hole saw.
Some motorcycles may also require notching near the shock mount and trimming or grinding of adjacent components to achieve proper clearance.
Additional trimming of the rear splash guard is required.
Toce recommends reviewing the complete installation video before purchasing.
Installation involves permanent modifications, including drilling the swingarm dust plate and trimming surrounding components. Some motorcycles require additional shock-mount-area clearance work. This product is best suited to mechanically experienced installers or qualified motorcycle fabrication shops.
Swingarm Dust Plate Drilling
The undertail exhaust routing requires a hole through the metal dust plate on the Z125 Pro swingarm.
Toce's published installation guidance identifies the hole position using measurements from the existing welds.
The listed reference measurements are approximately 1 inch from the bottom weld and 1 3/16 inches from the left weld on the dust shield, as demonstrated in the installation video.
These measurements should be confirmed against the supplied installation instructions and the motorcycle before drilling.
Do not drill until the intended hole location and clearance have been verified.
Published reference: 1 inch from the bottom weld and 1 3/16 inches from the left weld. Use the installation video to identify the correct reference points and hole location.
Shock-Mount and Splash-Guard Clearance
Some Z125 Pro motorcycles require additional trimming or notching near the shock-mount area to provide clearance for the exhaust routing.
The rear splash guard also requires modification as part of the undertail conversion.
Because installation involves custom fitting, final clearance can vary with the motorcycle's configuration and installed aftermarket components.
Verify adequate clearance throughout the rear suspension's travel before operating the motorcycle.
Any work involving load-bearing suspension components should be evaluated by a qualified professional before proceeding.
Optional Hole Saw and Arbor
Toce offers an optional 2-inch arbor and hole saw package for customers performing the required dust-plate modification.
This installation accessory is available as a selectable add-on.
It is not included when the standard exhaust is ordered without additional installation hardware.
Review the installation video and confirm the required tools before starting the job.
Optional Tag Bracket and Fender Eliminator
A compatible tag bracket and fender eliminator package is available separately for the Kawasaki Z125 Pro T-Slash exhaust.
The accessory provides a cleaner rear appearance and an alternative license-plate mounting arrangement for the undertail configuration.
Check rear lighting, turn-signal placement, and license-plate visibility after installation.
Additional aftermarket components may affect clearance and require custom fitting.
Long Runner Intake Compatibility
Toce developed a Long Runner Intake Assembly for the Kawasaki Z125 Pro as a complementary performance upgrade.
The stepped header design was developed with exhaust flow in mind, particularly when paired with compatible intake modifications.
The Long Runner Intake is a separate product and is not included with the T-Slash Full Exhaust.
Confirm the intake's supported model years before ordering it for a later Z125 Pro.
Compatibility With Other Aftermarket Parts
The T-Slash Undertail Full Exhaust is a custom-fit system, and compatibility with other aftermarket parts depends on their design and mounting locations.
Rearsets, splash guards, fender eliminators, suspension components, and other bolt-on accessories may affect installation clearance.
Some combinations may require additional fitting or fabrication.
For heavily modified motorcycles, review the intended installation before purchasing.
Installation Skill and Preparation
Toce recommends this system for riders or installers with mechanical experience.
Unlike a conventional bolt-on exhaust, the undertail configuration requires drilling, trimming, and careful clearance checks.
Watch the installation video in full and identify all required tools before removing the original exhaust.
Professional installation is recommended for customers without suitable fabrication experience.
Product Specifications
Installation and Model Fitment
This T-Slash Undertail Full Exhaust is intended for Kawasaki Z125 Pro motorcycles from 2017 through 2027.
Installation replaces the original exhaust header and muffler with the Toce stepped stainless steel header and undertail T-Slash canister.
The installation requires drilling the swingarm dust plate and modifying the rear splash guard.
Some motorcycles may also require additional clearance work near the shock mount.
Follow the model-specific installation video and supplied instructions before performing any permanent modifications.
Verify exhaust routing, suspension movement, rear-wheel clearance, mounting security, and lighting operation before riding.
Professional installation is strongly recommended when fabrication experience is limited.