TOCE PERFORMANCE / INDIAN POWERPLUS / PRO-COMP SERIES
THE ORIGINAL.
THE OG.
THE POWERPLUS 2-INTO-1.
The Toce Performance Pro-Comp 2-1 Full Exhaust System “The OG” brings true equal-length header engineering, oversized primary tubing, and the unmistakable low-frequency sound of a Toce Pro-Comp to Indian PowerPlus touring motorcycles. Designed for Challenger, Pursuit, Chieftain PowerPlus, and Roadmaster PowerPlus models, this complete low-mount exhaust system combines a precision-built header assembly, aircraft-grade aluminum muffler construction, and a dedicated engine-mounted capture bracket. Hand-built in Manchester, Connecticut, USA.
The Original Pro-Comp PowerPlus Exhaust
“The OG” is the original performance-focused Toce Pro-Comp exhaust configuration developed for Indian PowerPlus touring motorcycles.
Its distinctive 2-into-1 layout brings both exhaust primaries into a single collector and muffler assembly, replacing the factory exhaust routing with a system designed around the PowerPlus engine and chassis.
Unlike a simple slip-on replacement, this is a full exhaust system with purpose-built header routing, mounting provisions, and muffler construction.
The result is a recognizable Toce exhaust with a deep, assertive sound and an application-specific fitment approach.
Four Indian PowerPlus Touring Models
The OG is designed for the modern Indian PowerPlus touring family, covering the original Challenger and Pursuit alongside the newer PowerPlus-equipped Chieftain and Roadmaster.
2020 and newer PowerPlus touring models.
2022 and newer PowerPlus touring models.
2025 and newer PowerPlus-equipped models.
2025 and newer PowerPlus-equipped models.
This listing covers the PowerPlus platform, including supported 108- and 112-cubic-inch applications. It does not cover older Thunderstroke-powered Chieftain or Roadmaster motorcycles.
True Equal-Length Header Configuration
A defining feature of The OG is its true equal-length header configuration.
Toce uses larger and longer primary tubes to develop the exhaust path around the PowerPlus engine's requirements.
Equal-length routing is intended to balance the travel distance through the two primaries before the exhaust gases meet at the collector.
This geometry is a central part of the system's performance-oriented design and contributes to its distinctive exhaust character.
Larger, Longer Primaries
The OG uses larger and longer primary tubing rather than simply replacing the original muffler.
These design choices are intended to improve exhaust-flow characteristics and influence the system's low-frequency sound profile.
The exhaust is engineered as a complete assembly, with the primary routing, collector, muffler, and mounting hardware designed to work together.
Actual horsepower and torque results depend on engine displacement, ECU calibration, and supporting modifications.
Deep, Low-Frequency Pro-Comp Sound
One of the reasons riders choose The OG is its unmistakable exhaust note.
The combination of longer primaries, a full 2-into-1 layout, and Toce's Pro-Comp muffler produces a deep, aggressive V-twin character.
Rather than relying solely on a loud muffler outlet, the exhaust's tone is shaped by the complete header and muffler configuration.
It is designed for riders seeking a pronounced performance exhaust sound from their PowerPlus touring motorcycle.
Deep, low-frequency, aggressive Pro-Comp tone. Actual volume and character vary with engine displacement, calibration, and operating conditions. This is a performance-oriented exhaust, not a quiet replacement muffler.
Engine-Mounted Capture Bracket
The OG incorporates a dedicated engine-mounted capture bracket designed to reduce unwanted exhaust movement and flex.
Proper mounting is particularly important on a large touring motorcycle where the exhaust assembly experiences heat cycling, engine vibration, and road use.
Toce's application-specific bracket helps maintain the intended mounting arrangement without relying on generic universal hangers.
The bracket is a key part of the exhaust's structural design and installation integrity.
Aircraft-Grade Aluminum Muffler Construction
The Pro-Comp muffler assembly uses chemically certified 6061-T6 and 6063 aircraft-grade aluminum components.
These materials are selected for their combination of machinability, strength, and reduced weight relative to heavier conventional exhaust construction.
Toce combines its aluminum components with precision fabrication to produce the recognizable Pro-Comp muffler profile.
The result is a purpose-built muffler assembly matched to the PowerPlus exhaust system.
304 Stainless Steel Baffle Assembly
Inside the muffler is a 304 stainless steel spiral-welded perforated baffle assembly.
This internal structure forms the core of the exhaust's sound-management and flow design.
Stainless steel is used in the baffle assembly for durability in the hot exhaust environment.
The internal construction is part of the engineered Pro-Comp system, rather than a generic removable insert.
ISW Exhaust Packing
The OG uses ISW packing material around its internal baffle assembly.
Exhaust packing is a critical part of the muffler's acoustic design and influences how the exhaust note is shaped.
Toce pairs the packing material with its perforated stainless core and aluminum muffler components to achieve the intended Pro-Comp sound profile.
The packing and baffle are designed as parts of the complete muffler assembly.
Low-Mount 2-Into-1 Design
The OG uses a low-mount exhaust configuration that follows the PowerPlus touring motorcycle's lower exhaust routing.
The 2-into-1 layout brings the exhaust gases from both cylinders into a single muffler.
This provides a distinct appearance compared with the factory exhaust arrangement and highlights the custom Pro-Comp muffler.
The routing was developed specifically for the supported PowerPlus motorcycles.
Compatible With Electronic Suspension Models
The OG is designed to accommodate supported Indian PowerPlus touring configurations equipped with electronic suspension.
This is especially relevant for certain Pursuit, Chieftain PowerPlus, and Roadmaster PowerPlus motorcycles with additional touring equipment.
During installation, all suspension components, wiring, and related hardware must retain appropriate clearance.
Always follow the applicable installation instructions for the exact motorcycle configuration.
Saddlebag Support and Subframe Considerations
Full 2-into-1 exhaust conversions on Indian PowerPlus touring motorcycles can affect the original left-side saddlebag support arrangement.
Toce offers a dedicated Billet Subframe and Bag Support Assembly for the PowerPlus touring platform.
Review the available exhaust product options and your motorcycle's existing support configuration to determine which bag-support components are required.
Do not assume the separate billet support assembly is included unless it is explicitly identified in the selected product configuration.
ECU Calibration and Performance Optimization
Toce strongly recommends ECU calibration when installing The OG on a PowerPlus motorcycle.
A full exhaust changes the engine's exhaust-flow characteristics, and an appropriate calibration can help optimize throttle response, fueling, and overall drivability.
210 Speed Labs calibration files are commonly paired with this platform.
Confirm calibration compatibility with your motorcycle's engine, model year, ECU, and installed modifications before purchasing tuning services.
ECU calibration is a separate service unless specifically included in the selected package.
PowerPlus 108 and 112 Applications
The original product designation references the PowerPlus 108 engine, but the modern PowerPlus touring family also includes 112-cubic-inch configurations.
The OG is offered across the Challenger, Pursuit, Chieftain PowerPlus, and Roadmaster PowerPlus platform.
Because engine specifications and factory equipment vary by model year and trim, the correct fitment should be matched to the motorcycle's exact PowerPlus configuration.
This is not an exhaust for the older Thunderstroke engine platform.
Hand-Built in Manchester, Connecticut
Toce Performance manufactures The OG at its facility in Manchester, Connecticut.
The production process combines in-house machining, precision fabrication, welding, and application-specific assembly work.
Each exhaust reflects Toce's approach to manufacturing dedicated performance components for individual motorcycle platforms.
The OG is a US-built exhaust system designed specifically for the Indian PowerPlus touring family.
Product Specifications
Installation Overview
Installation involves removing the factory exhaust components and fitting the dedicated Toce header, collector, mounting, and muffler assemblies.
Inspect the original exhaust mounting points, left-side saddlebag support arrangement, and any installed electronic suspension hardware before beginning.
Use the supplied installation instructions and correct fasteners, and verify the position of the engine-mounted capture bracket.
After installation, check exhaust alignment, saddlebag clearance, suspension clearance, and all mounting points before operating the motorcycle.
Professional installation is recommended for a full touring exhaust conversion.
Fitment and Intended Use
Indian Challenger: 2020 and newer.
Indian Pursuit: 2022 and newer.
Indian Chieftain PowerPlus: 2025 and newer.
Indian Roadmaster PowerPlus: 2025 and newer.
For PowerPlus-equipped motorcycles only. Older Thunderstroke Chieftain, Roadmaster, Springfield, and Chief models are excluded.
This is a performance exhaust intended for closed-course or competition applications where legally permitted. Verify applicable emissions and noise requirements before installation.